Those are the only toilets I’m familiar with, at least with regards to maintenance and troubleshooting.
I’ve cleared a lot of clogged shitters, not once have I had to ensure the flapper is down in the reservoir. That’s “why won’t it stop running” not “why won’t I the water go down”.
Closing the flapper stops the water in the tank from going into the bowl.
This is completely unnecessary IMO. You stop the water in the tank from going into the bowl by not continuing to flush a clearly clogged toilet. There’s no issue with the flapper in this scenario and it will automatically seal in a few seconds from water pressure.
That’s another option. Sometimes there is no valve immediately beside the toilet, sometimes it’s crusty af and won’t turn or seal. This can be quicker.
Because this guide is for american toilets.
Those are the only toilets I’m familiar with, at least with regards to maintenance and troubleshooting.
I’ve cleared a lot of clogged shitters, not once have I had to ensure the flapper is down in the reservoir. That’s “why won’t it stop running” not “why won’t I the water go down”.
deleted by creator
Right, I am aware of all this. Just shut the water off and go to the plunger steps.
Turning off the water will stop the tank from refilling. Closing the flapper stops the water in the tank from going into the bowl.
I would imagine most people aren’t fast enough on the draw to think about doing this first step.
This is completely unnecessary IMO. You stop the water in the tank from going into the bowl by not continuing to flush a clearly clogged toilet. There’s no issue with the flapper in this scenario and it will automatically seal in a few seconds from water pressure.
That’s another option. Sometimes there is no valve immediately beside the toilet, sometimes it’s crusty af and won’t turn or seal. This can be quicker.